
Prolonging the Life of Your Endoscope or Borescope: Expert Tips for Maintenance, Storage, and Use
Maximizing the lifespan of your equipment: A guide to Proper Maintenance, Repair, and Use
Borescopes and industrial endoscopes can be used for mechanical inspection, car repair, plumbing fixes, electrical installs, house DIY, wall upgrades, HVAC maintenance, and more. They are excellent tools for conducting non-invasive inspections of small areas, like looking in the combustion chamber of an engine through the spark plug hole, or the inside of a wall without damaging the drywall. Here, we will address some best practices for endoscope maintenance and borescope maintenance that will keep your inspection camera working for a long time.
Maintenance and Cleaning
Modern industrial endoscopes and borescopes are digital cameras so in order for them to perform the best they need to be cleaned regularly, usually after each time you use them. The most important part of the camera to clean is the lens, which is typically located at the end of the inspection probe. Aside from that, industrial endoscopes and borescopes don’t have many moving parts to service. If they have a removable probe, do check to make sure the contacts inside the connector are kept clean and dry. Also wipe any dirt or dust off of the screen to ensure you have the best view.
Proper Storage
Digital borescopes and industrial endoscopes are digital cameras so they need to be treated and stored with some care. Store the inspection camera in it’s case if it came with one, and keep it in a dry place away from heat sources when you aren’t using it. If you aren’t going to use it for a long time, be sure to recharge the battery every 3-4 months to ensure it doesn’t discharge completely, which could affect the battery performance.
Repair and Calibration
It usually is not necessary to calibrate any Teslong industrial endoscopes or borescopes, however if one is not working to your satisfaction, customer service representative are ready and able to talk you through any trouble shooting or repair issues that you may have with your product. Call Teslong customer service at 877-899-8809.
Proper Use
Always follow the manufacturer guidelines found in the manual when using a borescope or industrial endoscope. Some of the most important points to pay attention to include:
- Don’t coil, or bend, the camera probe into too tight of a radius - doing so can damage the probe.
- Teslong camera probes are IP67 rated for dust and water ingress so they should be safe to submerge in water for short periods of time. Do not submerge the probe in solvents like isopropyl alcohol, paint thinner, or gasoline.
- Teslong camera probes are small digital camera and as such should not be exposed to high temperatures or open flames.
- If you aren’t going to use your device for a long time, be sure to recharge the battery every 3-4 months to ensure it doesn’t discharge completely, which could affect the battery performance.
Extend the Life of your Teslong Endoscope or Borescope
Teslong borescopes and industrial endoscopes are robust, durable, and built to last a long time. That said, they are electronic instruments that have some environmental limitations as well as sensitivities to dirt and dust. If you follow some basic guidelines while operating them then they can last a very long time. Shop the entire range of Teslong borescopes and industrial endoscopes HERE. Whether you want a simple USB scope, wireless WiFi model, endoscope camera for iPhone, endoscope camera for Android, or a complete stand-alone unit, Teslong makes an endoscope to suit your needs.
Explore Teslong Products:
Industrial Endoscopes
-
5インチHDスクリーンとさまざまなタイプのカメラを備えたNTS500産業用内視鏡
Original price ¥0 - Original price ¥0Original price ¥0¥30,100 - ¥35,500¥30,100 - ¥35,500Current price ¥30,100TESLONG NTS500産業用内視鏡は、IP67防水等級で、3500mAhリチウムイオン充電式バッテリーを搭載した5インチHD強化ガラススクリーンを備えた最高級の内視鏡モニターです。これは、機械的検査、車の修理、配管の修理、電気設備、家のDIY、壁のアップグレード、HVACのメンテナンスな...
詳細を全部見るOriginal price ¥0 - Original price ¥0Original price ¥0¥30,100 - ¥35,500¥30,100 - ¥35,500Current price ¥30,100 -
4.5インチHDスクリーンとさまざまなタイプのカメラを備えたNTS300産業用内視鏡
Original price ¥0 - Original price ¥0Original price ¥0¥16,000 - ¥21,100¥16,000 - ¥21,100Current price ¥16,000ピストルグリップとピボット4.5インチHDスクリーンを備えたTESLONGNTS300産業用内視鏡は、機械的検査、車の修理、配管の修理、電気設備、住宅のDIY、壁のアップグレード、HVACのメンテナンスなどに使用できます。これは、乾式壁を損傷することなく、スパークプラグの穴や壁の内側を通してエ...
詳細を全部見るOriginal price ¥0 - Original price ¥0Original price ¥0¥16,000 - ¥21,100¥16,000 - ¥21,100Current price ¥16,000 -
4.5インチHDスクリーンとさまざまなタイプのカメラを備えたMS450産業用内視鏡
Original price ¥0 - Original price ¥0Original price ¥0¥10,600¥10,600 - ¥10,600Current price ¥10,600TESLONG MS450産業用内視鏡は、機械的検査、車の修理、配管の修理、電気設備、住宅のDIY、壁のアップグレード、HVACのメンテナンスなどに使用できます。これは、乾式壁に損傷を与えることなく、スパークプラグの穴を通して、または壁の内側をエンジンの燃焼室で見るなど、小さな領域の非侵襲的検...
詳細を全部見るOriginal price ¥0 - Original price ¥0Original price ¥0¥10,600¥10,600 - ¥10,600Current price ¥10,600 -
NTS500B家庭用検査カメラ(5インチスクリーン付き)
Original price ¥19,600 - Original price ¥19,600Original price ¥19,600¥19,600¥19,600 - ¥19,600Current price ¥19,600ザ Teslong NTS500B は、直径5mmのデュアルカメラプローブを備えた高品質の家庭用5インチ画面検査カメラです。デュアルカメラ内視鏡 -FrontView + SideView-より多くの角度の目視検査-古いシングルカメラ内視鏡とは異なり、この新しい内視鏡はプローブに90°のカメラ...
詳細を全部見るOriginal price ¥19,600 - Original price ¥19,600Original price ¥19,600¥19,600¥19,600 - ¥19,600Current price ¥19,600 -
NTC125 0.5インチ(12.5mm)オートフォーカス内視鏡カメラ(5.0メガピクセルFHDマイクロインスペクションカメラ付き)
Original price ¥0 - Original price ¥0Original price ¥0¥7,600¥7,600 - ¥7,600Current price ¥7,600第3世代USB内視鏡-従来の固定焦点内視鏡とは異なり、このカメラレンズは、スマートフォンのカメラと同じように、1インチでも100フィートでも被写体に自動的に焦点を合わせます。 5.0MP解像度カメラ-これは、当社の最高解像度の5.0メガピクセルで、より大きく、より感光性の高いCMOS光セン...
詳細を全部見るOriginal price ¥0 - Original price ¥0Original price ¥0¥7,600¥7,600 - ¥7,600Current price ¥7,600